Honda Hrv Keyless Start System Problem. Its been a week now and message has not come back yet. I'm gonna give it a day or 2 and see if it goes away like some of your guys' have.
American honda is extending the warranty for the keyless start system on these vehicles to 9 years from the original date of purchase or 125,000. It’s easy to program a remote keyless entry system for your vehicle. Honda says there is nothing wrong with the car and that no other hrv has ever experienced this issue.
It May Be Because Of A Software Glitch.
My first inclination was to disconnect the battery. I will let honda deal with it tomorrow. Just hold the dead key fob near it for a couple seconds and the ignition will acknowledge the correct fob and start.
And Started The Engine With Push Button.
They did some type of fix and the light's gone now. First name will joined dec 19, 2015 threads 22 messages 3,137 reaction score. If the battery voltage is below the stipulated voltage, you should replace it with.
You Can Find Them In The Same Place You Would Normal Batteries.
Read the latest contents about honda hrv keyless start system problem in malaysia, check out latest car news, auto launch updates and expert views on malaysia car industry at wapcar. So, whenever you run into a honda “keyless start system problem,” you should check the condition of the key fob battery. All key fobs use the same type of battery, which is a cr2032 battery.
This Is Actually A Really Common Question, And There’s A Good Reason For That—Honda Pilot’s Are Incredibly Prone To Keyless Start System Failure, Especially In The 2016 And 2017 Models.
The key fob battery only gets used when needed, or else the battery would not last long. If this is the solution, the control unit is 300. I'm gonna give it a day or 2 and see if it goes away like some of your guys' have.
Keyless Start System Error, And Dtc B12C5 (Engine Start/Stop Switch Failure) Is Stored.
Doors or the trunk wouldn't open with my fob. First, turn the keys in the “on” position and press and hold down on the lock button of your remote transmitter. Before you turn off the engine press the foot brake or parking brake, give it a least 30 seconds to reset and then start the engine again, see if the message go away.