How To Change The Battery In A Honda Key Fob 2017. As a result of their frequent use, key fobs are subjected to a great deal of wear and tear. Hold the key fob together by pressing your thumb down right above where the battery is located.
Remove the dead battery, taking note of the positive and negative sides, in order to install the new battery correctly. Flip the face plate over and place the missing buttons back in their correct slots. The engine will probably start and run.
Reinsert The Battery Positive Sign Facing Out Into The Motherboard.
Purchase the proper battery type for your key fob. Wedge the edge of the key between the slot at the top of the key fob. Hold the “lock” button for one second.
Using Your Other Hand, Carefully Pry The Dead Battery Out And Replace It With The New One.
Note the position of the positive and negative sides of the battery in the remote. Release the button and turn the key to the “off” position. Using your other hand, remove the battery and place the new one in.
Wait For The Locks To Cycle.
Check the orientation of the battery to know where the positive (+) and negative (. Separate the two halves of your remote using a small flathead screwdriver. Wait for the doors to lock and unlock automatically.
Then, Pry Apart The Two Halves Of The Key Fob Using A Flathead Screwdriver.
Hold your finger just above the battery to make sure nothing essential falls out. Press your thumb down right above the battery to hold the fob together so the contents and external buttons don’t fall out. Press and hold the “lock” button for one second.
Follow These Steps To Change The Battery In A Honda Key Fob:
.if you like what you see hit that subscribe, i keep thing real. Line the back of the key fob up with the front half, gently press the pieces back together. To change the battery in your honda key fob, follow these simple steps: